L 2000

Vertical Machining Centres

Vertical Machining Centre with 2.000 mm longitudinal traverse

Technical Features

TABLE

Table surface

2.100 x 800 mm

T slots

5 x 18 x 150 mm

Max. weight on the table

2.000 kg

Table to floor height

1.120 mm

TRAVERSES

Longitudinal traverse (X)

2.000 mm

Cross traverse (Y)

820 mm

Vertical traverse (Z)

820 mm

HEAD

Main spindle power (S1/S6)

18,5 / 26 kW

Spindle taper

BBT 40

Speed range

8.000 rpm

Transmission

Polea-correa / Polea-katea / Belt-pulley / Poulie-courroie / Riemenscheibe

Distance from spindle to table (min./max.)

200 ÷ 1.020 mm

Distance from spindle to column

840 mm

TRANSLATION

System

Guía lineal rodillos / Arrabol motako gida lineala / Roller type linear guideway / Glissière linéaire à rouleaux / Linear-Rollenführung

Nº of guideways (X-Y-Z)

3 - 4 - 2

Runner blocks (X-Y-Z)

9 - 8 - 6

Ø ballscrews

45 x 10 mm

Rapid feedrates (X-Y-Z)

20 m/min

AUTOMATIC TOOL CHANGER

Selection system

Random / Ausazkoa / Arm type / À bras / Doppelgreifer

Nº of tools (BT 40)

30

Tool replacement time

2,5 s

Max. diameter with adjacent tools (BT 40)

76 mm

Max. diameter with alternate tools (BT 40)

150 mm

Max. tool lenght (BT 40)

300 mm

Max. tool weight (BT 40)

8 kg

ACCURACY

Positioning

± 0,005 mm

Repeatability

± 0,003 mm

OPTIONAL EQUIPMENT

Spindle taper

ISO (SK) 40 / BT 50 / ISO (SK) 50

Speed range

10.000, 12.000, 15.000 rpm

Nº of tools

40

GENERAL INFORMATION

Floor spare required

4.800 x 3.190 mm

Machine height

3.385 mm

Machine net weight

19.000 kg

Total power installed (FAGOR/HEIDENHAIN/FANUC) without options

24/42/36 kW

Standard and optional equipment

  • Standard
  • Optional
Electronic portable handwheel
Spindle oil cooler
Pressurization of the bearings of the main spindle
Coolant around the spindle -C.A.S.- (just ARM type automatic tool changer)
Safety brake for the Z axis
Direct connections to the ballscrews
Recirculating linear roller guideways
Measuring system by means of rotary encoders on all three axes X, Y, Z
Pneumatic counter balance
Air blast to clean the spindle taper while tool changes
Air blast for workpiece cleaning
Telescopic covers on 3 axes
Rigid tapping
Air gun
Coolant gun
RS-232C, Ethernet and USB communication port
Automatic centralized lubrication system
Pump for cleaning of the enclosure
Electrical cabinet with cooling system
Electrical cabinet with air conditioning
2 low voltage machine lamps
Working status lamp
BIG PLUS system, taper and face double contact
Spindle taper ISO 40 DIN 69871
Spindle taper ISO 50 DIN 69871
Direct-drive spindle 12.000/15.000 rpm
Electro-spindle
Coolant through the spindle (20/40 bar)
Measuring system by means of linear scales on all axes X, Y, Z
Chain type chip conveyor
ZF two-speed gearbox
Tool setter
Electronic probe for adjustment, measurement and verification of piece
Electronic dividing head for 4th and/or 4th and 5th axes
Remote Digital Assistance

Other Vertical Machining Centres

  • L 850

    Vertical Machining Centre with 850 mm longitudinal traverse

  • L 1050

    Vertical Machining Centre with 1.050 mm longitudinal traverse

  • L 1200

    Vertical Machining Centre with 1.200 mm longitudinal traverse

  • L 1400

    Vertical Machining Centre with 1.430 mm longitudinal traverse

  • L 1600

    Vertical Machining Centre with 1.620 mm longitudinal traverse